CAS No. 955997-89-4

Compound Information

Quick Contact

Email Id :

Mobile: 

+91-9666166015

Structure

Product Name

4-Isobutoxyphenyl methanamine acetate

CAS No.

 955997-89-4

Product Name

4-Isobutoxyphenyl methanamine acetate (CAS No. 955997-89-4)

Structure

 

CAS No.

CAS No. 955997-89-4

Related to Pharma

Pimavanserin

Molecular Formula

C13H21NO3

Formula Weight

239.31

Storage Condition

Ambient

Compound Specification

Description

An off white to pale yellow color powder.

Identification by HPLC

The retention time of the major peak in the chromatogram of the test solution should correspond to that of the chromatogram of standard solution, as obtained in the assay by HPLC method.

Related compounds by HPLC

Purity

Not less than 99.00%

 
  
 
  
  

SDS Information

Product Identification

Chemical Name           : (4-Isobutoxyphenyl) methane amine acetate
CAS No                        : 955997-89-4

Molecular Weight       : 239.31

Chemical Formula      : C13H21NO3

Composition/Information on Ingredients

Ingredient

CAS No

CONCENTRATION

(4-Isobutoxyphenyl) methane amine acetate

C13H21NO3

Hazards Identification

3.1 Classification of the substance or mixture

GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)

Acute toxicity, oral (Category 4) H302

No Resource File

3.2 GHS Label elements, including precautionary statements

Pictogram             Signal word                 Warning

Hazard statement(s)

H302 Harmful if swallowed

Precautionary statement(s)

P280 Wear protective gloves/protective clothing/eye protection/face

protection.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove

contact lenses, if present and easy to do. Continue rinsing.

 

 

3.3 Other hazards – Additional precautionary phrases are located throughout the safety data sheet.

First Aid Measures Eyes

4.1 Description of first aid measures

General advice: Consult a physician. Show this safety data sheet to the doctor in attendance. Move out of dangerous area.

If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.

In case of skin contact: Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.

In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Continue rinsing eyes during transport to hospital.

If swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.

4.2 Most important symptoms and effects, both acute and delayed

The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11

4.3 Indication of any immediate medical attention and special treatment needed

No data available

Fire Fighting Measures

5.1 Extinguishing media

Suitable extinguishing media: alcohol-resistant foam, dry chemical or carbon dioxide

5.2 Special hazards arising from the substance or mixture: In combustion toxic fumes may form.

5.3 Advice for firefighters: Wear self-contained breathing apparatus.

Wear protective clothing to prevent contact with skin and eyes.

Accidental Release Measures

6.1 Personal precautions, protective equipment and emergency procedures

 

 

Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas.Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.

Do not attempt to take action without suitable protective clothing.

For personal protection see section 8.

6.2 Environmental precautions

Prevent further leakage or spillage if safe to do so. Do not let product enter drains or river.

Alert the neighbourhood to the presence of fumes or gas.

6.3 Methods and materials for containment and cleaning up

Mix with sand or vermiculite. Sweep up and shovel. Transfer to a closable, labelled salvage container for disposal by an appropriate method.

6.4 Reference to other sections

For disposal see section 13.

Handling and Storage

7.1 Precautions for safe handling

Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Wash hands thoroughly after handling. Ensure there is sufficient ventilation of the area.

Normal measures for preventive fire protection. For precautions see section 2.2.

7.2 Conditions for safe storage, including any incompatibilities

Keep container tightly closed in a dry and well-ventilated area. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Inert atmosphere, Room Temperature

 

 

 

7.3 Specific end use(s)

The end use(s) have not been fully determined. The substance is supplied for Research and Development purposes by professionals only.

Exposure Controls/Personal Protection

8.1 Control parameters

                        Components with workplace control parameters

Contains no substances with occupational exposure limit values.

              

8.2 Exposure controls

               Appropriate engineering controls

Appropriate engineering controls

Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.

Personal protective equipment

Eye/face protection: Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).

Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of

contaminated gloves after use in accordance with applicable laws and good laboratory practices.

W ash and dry hands.

Body Protection: Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.

Respiratory protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

 

Control of environmental exposure

Do not let product enter drains.

 

Physical and Chemical Properties

PHYSICAL AND CHEMICAL PROPERTIES

  1. a) Appearance White to yellow powder or crystals
  2. b) Odour No data available
  3. c) Odour Threshold No data available
  4. d) pH No data available

 

  1. e) Melting point/ No data available

freezing point

  1. f) Initial boiling point No data available

and boiling range

  1. g) Flash point No data available
  2. h) Evaporation rate No data available
  3. i) Flammability (solid, gas) No data available
  4. j) Upper/lower flammability No data available

or explosive limits

  1. k) Vapour pressure No data available
  2. l) Vapour density No data available
  3. m) Relative density No data available
  4. n) W ater solubility No data available
  5. o) Partition coefficient: n- No data available

octanol/water

  1. p) Auto-ignition No data available

temperature

  1. q) Decomposition No data available

temperature

 

  1. r) Viscosity No data available
  2. s) Explosive properties No data available
  3. t) Oxidizing properties No data available

Stability and Reactivity

10.1 Reactivity:  No data available

10.2 Chemical stability: Stable under recommended storage conditions.

10.3 Possibility of hazardous reactions: No data available

10.4 Conditions to avoid: Not data available

 

10.5 Incompatible materials: Strong oxidizing agents

10.6 Hazardous decomposition products: Carbon monoxide , carbon dioxide , nitrogen oxides

Toxicological Information

No data available.

Ecological Information

Not available.

Disposal Considerations

Waste treatment methods

Disposal Operations

Consult state, local or national regulations for proper disposal. Hand over to authorized disposal company as hazardous waste.

Disposal of Packaging: Disposal must be made according to official regulations

Transport Information

Not data available.

Regulatory Information

Safety, health and environmental and national regulations: Product is not subject to any additional regulations or provisions

California Proposition 65: Not listed on California’s listing of known or potential carcinogens.

U.S. Federal Regulations: SARA 313: Not applicable

SARA 302: Not applicable

SARA 311/312 Hazard Categories: See section 2 for more information

Safety Assessment: No Chemical Safety Assessment

Other Information

The information above is believed to be accurate and represents the best information currently available to us.