- Home
- About Us
- Business Units
- Quality Assurance
- Research & Development
- Sustainability
- Products
- Contact
Office Address:
Shreejaya Laboratories Pvt. Ltd., Plot No. 11 Sy.No.342 , ALEAP Industrial Area, Near Pragathi Nagar, Hyderabad-500 090.
2-Chloromethyl-3,4-Dimethyl pyridine Hydrochloride |
CAS No.72830-09-2
| |||||||||||||||
Description | An off white to light brown colored powder |
Identification by HPLC | The retention time of the major peak of the Sample preparation correspond to that of the working standard. |
Chromatographic purity by HPLC (% in area normalization) | |
Purity | Not less than 99.00% |
|
GHS Classification (United States) Acute toxicity, Oral (Category 4) Acute toxicity, Dermal (Category 4) Skin irritation (Category 2) Skin sensitization (Category 1) Serious eye damage (Category 1) Specific target organ toxicity – repeated exposure (Category 2) Pictogram(s) Signal word: Danger Hazard statement(s) H302 Harmful if swallowed. H312 Harmful in contact with skin. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H373 Causes damage to organs through prolonged or repeated exposure. Precautionary statement(s): P260 Do not breathe dust/fume/gas/mist/vapors/spray. P261 Avoid breathing dust/fume/gas/mist/vapors/spray. P264 Wash skin thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. P301+P310 IF SWALLOWED: Immediately call a poison center or doctor. P302+P352 IF ON SKIN: Wash with plenty of soap and water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P310 Immediately call a poison center or doctor. P312 Call a poison center or doctor if you feel unwell. P314 Get medical advice/attention if you feel unwell. P321 Specific treatment (see supplemental first aid instructions on this label). P322 Specific measures (see supplemental first aid instructions on this label). P330 Rinse mouth. P332+P313 If skin irritation occurs: Get medical advice/attention. P333+P313 If skin irritation or rash occurs: Get medical advice/attention. P362 Take off contaminated clothing and wash before reuse. P363 Wash contaminated clothing before reuse. P405 Store locked up. P501 Dispose of contents/container to an approved waste disposal plant. Hazards not otherwise classified (HNOC) or not covered by GHS: None
General advice: Immediately remove any clothing contaminated by the product. Move out of dangerous area. Consult a physician and show this safety data sheet.
If inhaled: Move person to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Obtain medical aid.
In case of skin contact: Immediately flush skin with running water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse. Obtain medical aid immediately.
In case of eye contact: Immediately flush open eyes with running water for at least 15 minutes. Obtain medical aid immediately.
Ingestion: Do NOT induce vomiting without medical advice. Rinse mouth with water. Never administer anything by mouth to an unconscious person. Obtain medical aid immediately.
Most important symptoms and effects, both acute and delayed
No further information available. Please see sections 2 and 11
Indication of any immediate medical attention and special treatment needed:
No data available
Suitable extinguishing media: Use water spray, dry chemical, carbon dioxide, or chemical foam. Specific hazards arising from the chemical: Carbon oxides, Hydrogen chloride, Nitrogen oxides. Advice for firefighters: As in any fire, wear a NIOSH-approved or equivalent, pressure-demand, self-contained breathing apparatus and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion.
Personal precautions, protective equipment and emergency procedures: Wear protective equipment and keep unprotected personnel away. Ensure adequate ventilation. Remove all sources of ignition.
Prevent further leak or spill if safe to do so. For personal protective equipment, please refer to section 8.
Environmental precautions: Do not let product enter drains, other waterways, or soil. Methods and materials for containment and cleaning up: Prevent further leak or spill if safe to do so. Vacuum, sweep up, or absorb with inert material and place into a suitable disposal container. Consult local regulations for disposal. See section 13 for further disposal information
Precautions for safe handling: Avoid contact with skin, eyes, and personal clothing. Wash hands thoroughly after handling. Avoid breathing fumes. Use only with adequate ventilation. Wear suitable protective clothing, gloves, and eye/face protection. Keep away from sources of ignition. Minimize dust generation and accumulation. Keep container tightly closed. Open and handle container with care. Do not eat, drink, or smoke while handling.
Conditions for safe storage, including any incompatibilities: Store in a tightly-closed container when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. Keep away from sources of ignition. ,Store long-term in a cool, dry place
Physical State: Solid Molecular
Formula: C8H11Cl2NO2
Molecular Weight: 224.84
Odor: Not available.
pH: Not available.
Boiling Point Range: Not available.
Freezing/Melting Point: 151-155°C
Flash Point: Not available.
Evaporation Rate: Not available.
Flammability(solid,gas): Please see section 2.
Explosive limits: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Solubility: Not available.
Relative Density: Not available.
Refractive Index: Not available.
Volatility: Not available.
Auto-ignition Temperature: Not available.
Decomposition Temperature: Not available.
Partition Coefficient: Not available.
Exposure limits:
OSHA PEL: Not available.
NIOSH REL: Not available.
ACGIH TLV: Not available.
Appropriate engineering controls: Avoid contact with skin, eyes, and clothing. Wash hands before breaks and immediately after handling the product. Facilities storing or utilizing this
material should be equipped with an eyewash fountain. Use adequate general and local exhaust ventilation to keep airborne concentrations low
Personal protection
Eyes: Based on an evaluation of the eye or face hazards present, wear chemical splash-resistant safety glasses or goggles with side protection. A face shield may be appropriate in some workplaces. Use eyewear tested and approved under appropriate government standards such as OSHA 29 CFR 1910.133 or EU EN166.
Hands: Wear gloves selected based on an evaluation of the possible hazards to hands and skin, the duration of use, the physical conditions of the workplace, and the chemical resistance and physical properties of the glove material.
Skin and body: Protective clothing must be selected based on the hazards present in the workplace, the physical environment, the duration of exposure, and other factors. No fabric can provide protection against all potential hazards; therefore it is important to select the appropriate protective clothing for each specific hazard. At the minimum, wear a laboratory coat and close-toed footwear.
Respiratory: Respirators are not a substitute for accepted engineering control measures such as enclosure or confinement of the operation, general and local ventilation, and substitution of less toxic materials. When respiratory personal protective equipment is appropriate based on an assessment of respiratory hazards in the workplace, use a NIOSH- or CEN-certified respirator.
Reactivity: Not available.
Chemical stability: Stable under recommended temperatures and pressures.
Possibility of hazardous reactions: Not available.
Conditions to avoid: Dust generation.
Incompatible materials: Strong oxidizing agents.
Hazardous decomposition products: Carbon oxides, Hydrogen chloride, Nitrogen oxides.
RTECS# Not available.
Acute toxicity: Not available.
Routes of exposure: Inhalation, eye contact, skin contact, ingestion.
Symptoms related to the physical, chemical and toxicological characteristics: Skin contact may result in inflammation characterized by itching, scaling, reddening, blistering, pain or dryness. Eye contact may result in redness, pain or severe eye damage. Inhalation may cause irritation of the lungs and respiratory system. Overexposure may result in serious illness or death.
Carcinogenicity
IARC: Not classified.
NTP: Not listed.
OSHA: Not listed. Acute toxic effects: Inflammation of the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally, blistering.
Not data available.
Disposal of waste: Chemical waste generators must determine whether a discarded chemical is classified as hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. Observe all federal, state and local regulations when disposing of the substance.
Disposal of packaging: Do not reuse containers. Dispose of as unused product.
UN number: UN3077
Proper shipping name: Environmentally hazardous substance, solid, n.o.s. (2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride)
Transport hazard class: 9; Miscellaneous
Packing group: III
IATA
UN Number: UN3077
Proper shipping name: Environmentally hazardous substance, solid, n.o.s. (2-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride)
Transport hazard class: 9;Miscellaneous
Packing group: III
The information above is believed to be accurate and represents the best information currently available to us.
© All Copyright 2023 by SHREEJAYA LABORATORIES PVT.LTD.