CAS No. 545445-44-1

Compound Information

Quick Contact

Email Id : [email protected]

Mobile: +91-9666166015

Structure

545445-44-1

Product Name

3-Morpholino-1-(4(2-Oxopiperidin-1-yl) Phenyl)-5,6-Dihydropyridin-2(1H)-One (CAS No. 545445-44-1)

CAS No.

545445-44-1

PropertyDetails
Product Name3-Morpholino-1-(4(2-Oxopiperidin-1-yl) Phenyl)-5,6-Dihydropyridin-2(1H)-One (CAS No. 545445-44-1)
Structure545445-44-1
CAS No.CAS No. 545445-44-1
Related to PharmaApixaban
Molecular FormulaC20H25N3O3
Formula Weight355.43
Storage ConditionAmbient

Compound Specification

Property Details
Description Yellow to brown color powder
Identification by HPLC The retention time of the sample should match with the retention time of standard in chromatographic purity by HPLC.
Chromatographic purity by HPLC (% in area normalization)
Purity Not less than 99.00%

SDS Information

Product Identification

Chemical Name : 3-Morpholino-1-(4-(2-oxopiperidin-1-yl)phenyl)-5,6-dihydropyridin2(1h)-one
CAS No : 545445-44-1
Molecular Weight : 355.4
Chemical Formula : C20H25N3O3

Composition/Information on Ingredients

IngredientCAS NoClassificationConcentration
3-Morpholino-1-(4-(2-oxopiperidin-1-yl)phenyl)-5,6-dihydropyridin2(1h)-one

545445-44-1

≤ 100

Hazards Identification

3.1. Classification of the substance or mixture:
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS): No data
3.2. GHS Label elements, including precautionary statements: No known hazard.

First Aid Measures Eyes

4.1. Description of first aid measures.
General advice: Consult a physician. Show this safety data sheet to the doctor in attendance. Move
out of dangerous area.
If inhaled: Remove victim to fresh air. In severe cases or if symptoms persist, seek medical attention.
In case of skin contact: Immediately wash skin with copious amounts of water for at least 15
minutes while removing contaminated clothing and shoes. If irritation persists, seek medical
attention.
In case of eye contact: Immediately flush with plenty of water. After initial flushing, remove any
contact lenses and continue flushing for at least 15 minutes. Keep eye wide open while rinsing. Get
medical attention.
If swallowed: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical
attention.
4.2. Most important symptomsand effects,both acute and delayed:
See Section 2.2 and/or in Section 11.
4.3. Indication of any immediate medical attention and special treatment needed: No data.

Fire Fighting Measures

5.1. Extinguishing media: Use dry sand, dry chemical or alcohol-resistant foam for extinction. 

5.2. Special hazards arising from the substance or mixture: Carbon monoxide, nitrogen oxides. 

5.3. Advice for ing if necessary. 

5.4. Further information: No data available.

Accidental Release Measures

6.1. Personal precautions, protective equipment and emergency procedures: Ensure adequate ventilation. Use personal protective equipment. 

6.2. Environmental precautions: Should not be released into the environment. See Section 12 for additional ecological information.

6.3. Methods and materials for containment and cleaning up: Sweep up or vacuum up spillage and collect in suitable container for disposal.

6.4. Reference to other sections: Refer to protective measures listed in Sections 8 and 13.

Handling and Storage

7.1. Precautions for safe handling: Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition – No smoking. Take measures to prevent the build up of electrostatic charge. For precautions see section 2.2. 

7.2. Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. 

7.3. Specific end use(s): Laboratory chemicals, for scientific research and development only.

Exposure Controls/Personal Protection

8.1. Control parameters: Components with workplace control parameters: Contains no substances with occupational exposure limit values. 

8.2. Exposure controls: Appropriate engineering controls: Ensure that eyewash stations and safety showers are close to the workstation location. Ensure adequate ventilation, especially in confined areas. 

Personal protective equipment: 

Eye/face protection: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA’s eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166. Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.

 Body Protection: Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. 

Respiratory protection: 

Control of environmental exposure: Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

Physical and Chemical Properties

9.1. Information on basic physical and chemical properties
(a) Appearance: Solid
(b) Odour: No data
(c) Odour Threshold: No data
(d) pH: No data
(e) Melting point/freezing point: 170 – 180◦C
(f) Initial boiling point and boiling range: No data
(g) Flash point: No data
(h) Evaporatoin rate: No data
(i) Flammability (solid, gas): No data
(j) Upper/lower flammability or explosive limits: No data
(k) Vapour pressure: No data
(l) Vapour density: No data
(m) Relative density: No data
(n) Water solubility: No data
(o) Partition coefficient: n-octanol/water: No data
(p) Auto-ignition: No data
(q) Decomposition temperature: No data
(r) Viscosity: No data
(s) Explosive properties: No data
(t) Oxidizing properties: No data

9.2. Other safety information:
Formula : C20H25N3O3
Molecular weight : 355.4
CAS Number : 545445-44-1

Stability and Reactivity

10.1. Reactivity No data 

10.2. Chemical stability Stable under recommended storage conditions. 

10.3. Possibility of hazardous reactions No data 

10.4. Conditions to avoid 

10.5. Incompatible material No data. 

10.6. Hazardous decomposition products:

Hazardous decomposition products formed under fire conditions: Carbon monoxide, nitrogen oxides.
Other decomposition products: No data In the event of fire: See Section 5.

Toxicological Information

11.1 Information on toxicological effects
Acute toxicity: No data available.
Skin irritation/corrosion: No data available.
Eye damage/irritation: No data available.
Respiratory or skin sensitization: No data available.
Germ cell mutagenicity: No data available.
Carcinogenicity: No data available.
Reproductive toxicity: No data available.
Specific target organ system toxicity – single exposure: No data available.
Specific target organ system toxicity – repeated exposure: No data available.
Aspiration hazard: No data available.
Additional information: To the best of our knowledge, the chemical, physical and toxicological
properties of this substance have not been thoroughly investigated.

Ecological Information

Not available.

Disposal Considerations

13.1. Waste treatment methods
Product : Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations.
Contaminated packaging: Dispose of as unused product.

Transport Information

Not available.

Regulatory Information

No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313.

Other Information

The information above is believed to be accurate and represents the best information currently
available to us.