CAS No. 38385-95-4

Chemical Name : 2-Piperidin-4-YL-1H-Benzoimidazole
CAS No : 38385-95-4
Molecular Weight : 201.27
Chemical Formula : C12H15N3

3.1 Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Acute toxicity, oral(Category 4) H302
Skin corrosion/irritation (Category 2) H315
Serious eye damage/eye irritation(Category 2A ) H319
Specific target organ toxicity, single exposure;Respiratory system(Category 3) H335
No Resource File
3.2 GHS Label elements, including precautionary statements
Hazard statement(s)
H302 Harmful if swallowed

H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
Precautionary statement(s)
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
3.3 Other hazards: Additional precautionary phrases are located throughout the safety data
sheet.

4.1. Description of first aid measures.
General advice: Consult a physician. Show this safety data sheet to the doctor in attendance. Move
out of dangerous area.
If inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration.
Consult a physician.
In case of skin contact: Take off contaminated clothing and shoes immediately. Wash off with soap
and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a
physician. Continue rinsing eyes during transport to hospital.
If swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person.
Rinse mouth with water. Consult a physician.

4.2. Most important symptomsand effects,both acute and delayed:

The most important known symptoms and effects are described in the labelling (see section 2.2)
and/or in section 11
4.3. Indication of any immediate medical attention and special treatment needed: No data.

5.1. Extinguishing media: Suitable extinguishing media: alcohol-resistant foam, dry chemical or
carbon dioxide Unsuitable extinguishing media: no data
5.2 Special hazards arising from the substance or mixture: In combustion toxic fumes may form.
5.3 Advice for firefighters Wear self-contained breathing apparatus. Wear protective clothing to
prevent contact with skin and eyes.

6.1. Personal precautions, protective equipment and emergency procedures: Wear respiratory
protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas. Avoid breathing dust. Do not attempt to take action without suitable
protective clothing. For personal protection see section 8.
6.2. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let
product enter drains or river. Alert the neighbourhood to the presence of fumes or gas.
6.3. Methods and materials for containment and cleaning up: Mix with sand or vermiculite.
Sweep up and shovel. Transfer to a closable, labelled salvage container for disposal by an appropriate
method.
6.4. Reference to other sections: For disposal see section 13.

7.1. Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and
aerosols. Wash hands thoroughly after handling. Ensure there is sufficient ventilation of the area.
Normal measures for preventive fire protection. For precautions see section 2.2.

7.2. Conditions for safe storage, including any incompatibilities: Keep container tightly closed in
a dry and well-ventilated area. Containers which are opened must be carefully resealed and kept
upright to prevent leakage.Keep in dark place,Inert atmosphere,Room temperature
7.3. Specific end use(s): The end use(s) have not been fully determined. The substance is supplied for
Research and Development purposes by professionals only.

7.2. Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. 

7.3. Specific end use(s): Laboratory chemicals, for scientific research and development only.

8.1. Control parameters: Components with workplace control parameters: Contains no substances
with occupational exposure limit values.
8.2. Exposure controls: Appropriate engineering controls: Handle in accordance with good industrial
hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment:
Eye/face protection: Face shield and safety glasses Use equipment for eye protection tested and
approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove
removal technique (without touching glove's outer surface) to avoid skin contact with this product.
Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory
practices. Wash and dry hands.
Body Protection: Complete suit protecting against chemicals, The type of protective equipment
must be selected according to the concentration and amount of the dangerous substance at the specific
workplace.
Respiratory protection: Where risk assessment shows air-purifying respirators are appropriate use a
full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a fullface supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure: Do not let product enter drains.

9.1. Information on basic physical and chemical properties

(a) Appearance: Form: Crystal – Powder / Colour: White – Reddish yellow
(b) Odour: No data
(c) Odour Threshold: No data
(d) pH: No data
(e) Melting point/freezing point: No data
(f) Initial boiling point and boiling range: No data
(g) Flash point: No data
(h) Evaporatoin rate: No data
(i) Flammability (solid, gas): No data
(j) Upper/lower flammability or explosive limits: No data
(k) Vapour pressure: No data
(l) Vapour density: No data
(m) Relative density: No data
(n) Water solubility: No data
(o) Partition coefficient: n-octanol/water: No data
(p) Auto-ignition: No data
(q) Decomposition temperature: No data
(r) Viscosity: No data
(s) Explosive properties: No data
(t) Oxidizing properties: No data
9.2. Other safety information:
No data available

10.1. Reactivity No data
10.2. Chemical stability Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions No data

10.4. Conditions to avoid: No data available
10.5. Incompatible material: Strong oxidizing agents
10.6. Hazardous decomposition products: Carbon monoxide , carbon dioxide , nitrogen oxides

No data available

Not available.

13.1. Waste treatment methods
Disposal Operations: Consult state, local or national regulations for proper disposal. Hand over to authorised disposal company as hazardous waste.
Disposal of Packaging: Disposal must be made according to official regulations.

Not available.

Safety, health and environmental and national regulations: Product is not subject to any
additional regulations or provisions.
Safety Assessment: No Chemical Safety Assessmen

The information above is believed to be accurate and represents the best information currently
available to us.