Compound Information
Structure
Product Name
2-Ethoxyethyl-4-Methyl benzene Sulfonate (CAS No. 17178-11-9)
CAS No.
17178-11-9
Property | Details |
---|---|
Product Name | 2-Ethoxyethyl-4-Methyl benzene Sulfonate (CAS No. 17178-11-9) |
Structure | |
CAS No. | CAS No. 17178-11-9 |
Related to Pharma | Bilastine |
Molecular Formula | C11H16O4S |
Formula Weight | 244.30 |
Storage Condition | Ambient |
Compound Specification
Property | Details |
---|---|
Description | A clear colorless to yellow liquid |
Identification by HPLC | Retention time of principal peak in the sample chromatogram should match with the retention time of the principal peak in the working standard chromatogram in related substances test by GC |
Related substance by GC | |
Purity | Not less than 99.00% |
Assay by GC (On anhydrous basis) | Not less than 97.0%w/w |
SDS Information
Product Identification
Chemical Name : 2-Ethoxyethyl 4-methylbenzenesulfonate
CAS No : 17178-11-9
Molecular Weight : 244.31
Chemical Formula : C11H16O4S
Composition/Information on Ingredients
Ingredient | CAS No | Classification | Concentration |
---|---|---|---|
2-Ethoxyethyl-4-Methyl benzene Sulfonate (CAS No. 17178-11-9) | 17178-11-9 | — | — |
Hazards Identification
Hazardous Ingredients 2-Ethoxyethyl 4-methylbenzenesulfonate
GHS label elements, including precautionary statements
Hazard statement(s)
H317 May cause an allergic skin reaction
H319 Causes serious eye irritation
Precautionary statement(s)
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+351+338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing.
First Aid Measures Eyes
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with clean, running
water for at least 15 minutes while keeping eyes.
Skin Contact: After contact with skin, wash with generous quantities of running water. Gently and
thoroughly wash affected area with running water and non-abrasive soap. Cool water
may be used. Cover the affected area with emollient. Seek medical attention. Wash
any contaminated clothing prior to reusing.
Inhalation: Remove the victim from the source of exposure to fresh, uncontaminated air. If victim's
breathing is difficult, administer oxygen. Seek medical attention.
Ingestion: Do NOT induce vomiting. Give water to victim to drink. Seek medical attention.
Fire Fighting Measures
Extinguishing media: Carbon dioxide, dry chemical powder, alcohol or polymer foam.
Special fire fighting procedures: Wear self-contained breathing apparatus and protective clothing to prevent
Unusual fire and explosion hazards/ decomposition of product: Emits toxic fumes under fire conditions.
Accidental Release Measures
Steps to be taken if material is spilled or otherwise released into the environment – Wear Appropriate
respirator, impervious boots and heavy rubber (or otherwise impervious) gloves. Scoop up solid
material or absorb liquid material and place into appropriate container. Ventilate area and wash
affected spill area after pickup is complete. Wash skin immediately with plenty of water. Place solid
or absorbed material into containers and close for disposal.
Handling and Storage
Avoid prolonged exposure.
Use caution when handling.
Exposure to any chemical should be limited.
Do not breath dust or vapor.
Have safety shower and eye wash available.
Do not get in eyes, on skin or on clothing.
Keep container tightly closed.
Store in a cool, dry, well-ventilated place.
Ensure adequate ventilation during use.
Use only in a chemical fume hood.
To the best of our knowledge, the health hazards of this product have not been fully investigated.
This product is provided solely for the purpose of research and development.
Exposure Controls/Personal Protection
Wear Protective safety goggles.
Wear chemical-resistant gloves.
Wear protective clothing and chemical resistant boots.
Ensure ventilation during use.
After contact with skin, wash immediately.
Physical and Chemical Properties
Appearance: liquid
Molecular Formula: C11H16O4S
Molecular Weight: 244.31 (g)
Stability and Reactivity
Incompatibilities: Strong oxidizing agents
Strong acids and bases
Hazard Decomposition Products
Carbon carbon monoxide
carbon dioxide
Sulfur oxides of sulfur
Toxicological Information
Acute effects:
Irritant
May be harmful by ingestion and inhalation.
Material is irritating to mucous membranes and upper respiratory tract.
To the best of our knowledge, the toxicological properties of this product have not been fully
investigated or determined.
Ecological Information
Not available.
Disposal Considerations
Absent other actions demanded by federal or local regulations – Dissolve or mix the material with a
combustible solvent and burn in a regulated, chemical incinerator equipped with after burner and
scrubber.
Observe all federal, state and local laws.
Transport Information
Shipping Name Classed non-hazardous for shipment
Regulatory Information
Adhere to all Federal, State and local regulations.
Other Information
The information above is believed to be accurate and represents the best information currently
available to us.