Compound Information
Structure
Product Name
| 7-(4-Bromobutoxy)-3,4-Dihydroquinolin-2(1H)-One (CAS No. 129722-34-5) |
CAS No.
129722-34-5 |
| Property | Details |
|---|---|
| Product Name | 7-(4-Bromobutoxy)-3,4-Dihydroquinolin-2(1H)-One (CAS No. 129722-34-5) |
| Structure |  |
| CAS No. | CAS No. 129722-34-5 |
| Related to Pharma | Aripiprazole |
| Molecular Formula | C13H16BrNO2 |
| Formula Weight | 298.18 |
| Storage Condition | Ambient |
Compound Specification
| Property | Details |
|---|---|
| Description | White to Almost white powder to crystal |
| Identification by HPLC | The RT of the Major peak in the chromatogram of the test sample should correspond to that of working standard. |
| Chromatographic purity by HPLC (% in area normalization) | |
| Purity | Not less than 99.00% |
SDS Information
Product Identification
Chemical Name : 7-(4-Bromobutoxy)-3,4-dihydroquinolin-2(1H)-one
CAS No : 129722-34-5
Molecular Weight : 298.17
Chemical Formula : C13H16BrNO2
Composition/Information on Ingredients
| Ingredient | CAS No | Classification | % by Weigh |
|---|---|---|---|
| 7-(4-Bromobutoxy)-3,4-dihydroquinolin-2(1H)-one | C13H16BrNO2 | — | 100% |
Hazards Identification
Acute toxicity, oral (Category 4) – H302
Skin corrosion/irritation (Category 2) – H315
Serious eye damage/eye irritation (Category 2A) – H319
Acute toxicity, inhalation (Category 4) – H332
Specific target organ toxicity, single exposure; Respiratory tract irritation (Category 3) – H335
Pictogram
Hazard statement(s)
H302 – Harmful if swallowed
H315 – Causes skin irritation
H319 – Causes serious eye irritation
H332 – Harmful if inhaled
H335 – May cause respiratory irritation
Precautionary statement(s)
P261 – Avoid breathing dust/fumes/gas/mist/vapours/spray.
P280 – Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
First Aid Measures Eyes
Eye Contact: In case of contact, immediately flush eyes with copious amounts of water for at least 15 minutes.
Skin Contact: In case of contact, immediately wash skin with soap and copious amounts of water.
Serious Skin Contact: In case of contact, immediately wash skin with soap and copious amounts of water. Seek medical attention immediately.
Serious Inhalation: Not available
Inhalation: If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen.
Serious Ingestion: Not available
Fire Fighting Measures
No data available.
Accidental Release Measures
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container.
Large Spill: Stop leak if without risk. Do not get water inside container. Do not touch spilled material. Use water spray to reduce vapors. Prevent entry into sewers, basements or confined areas; dike if needed. Call for assistance on disposal. Be careful that the product is not present at a
concentration level above TLV. Check TLV on the MSDS and with local authorities
Handling and Storage
Precautions: For precautions see section 2
Storage: Ambient temperature.
Exposure Controls/Personal Protection
Engineering Controls: Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.
Personal Protection: Splash goggles. Synthetic apron. Vapor and dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves.
Personal Protection in Case of a Large Spill: Splash goggles. Full suit. Vapor and dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product.
Exposure Limits: Not available.
Physical and Chemical Properties
9.1. Information on basic physical and chemical properties
Physical state and appearance: Crystal – Powder / Colour: White to Almost white powder to crystal
Odor: Not available.
Taste: Not available.
Molecular Weight: 298.1789g/mole
Color:
pH (1% soln/water): Not available
Boiling Point: Not available.
Melting Point: Not available.
Critical Temperature: Not available.
Specific Gravity: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: Not available.
Solubility: Not available.
Stability and Reactivity
Stability: Not available. Instability
Temperature: Not available.
Conditions of Instability: Excess heat, incompatible materials, moisture. May decompose on contact
with moist air or water.
Incompatibility with various substances: Not available.
Corrosivity: Non-corrosive in presence of glass.
Special Remarks on Reactivity: Not available.
Special Remarks on Corrosivity: Not available.
Polymerization: Not available
Toxicological Information
Routes of Entry: Unknown.
Toxicity to Animals: Not available.
Chronic Effects on Humans: Not available.
Other Toxic Effects on Humans: Not available.
Special Remarks on Toxicity to Animals: Not available.
Special Remarks on Chronic Effects on Humans: Not available.
Special Remarks on other Toxic Effects on Humans: Not available
Ecological Information
Not available.
Disposal Considerations
Waste Disposal: Waste must be disposed of in accordance with federal, state and local
environmental control regulations.
Transport Information
Not available.
Regulatory Information
Not available.
Other Information
The information above is believed to be accurate and represents the best information currently
available to us.