- Home
- About Us
- Business Units
- Quality Assurance
- Research & Development
- Sustainability
- Products
- Contact
Office Address:
Shreejaya Laboratories Pvt. Ltd., Plot No. 11 Sy.No.342 , ALEAP Industrial Area, Near Pragathi Nagar, Hyderabad-500 090.
5-(DIFLUORO METHOXY)-2-{[(3,4 DIMETHOXYPYRIDIN-2-YL) METHYL] THIO}-1H-BENZIMIDAZOLE (CAS No. 102625-64-9) |
102625-64-9
Product Name | 5-(DIFLUORO METHOXY)-2-{[(3,4 DIMETHOXYPYRIDIN-2-YL) METHYL] THIO}-1H-BENZIMIDAZOLE (CAS No. 102625-64-9) |
Structure | |
CAS No. | CAS No. 102625-64-9 |
Related to Pharma | Pantoprazole |
Molecular Formula | C16H15F2N3O3S |
Formula Weight | 367.37 |
Storage Condition | Ambient |
| |||||||||
. Product Identification
Ingredient | CAS No | CONCENTRATION |
5-Difluoromethoxy-2-[(3,4-dimethoxy-2-pyridinyl)methyl]thio-1H benzimidazole | 102625-64-9 | — |
GHS Classification (United States)
Skin irritation (Category 2)
Eye irritation (Category 2A)
Specific target organ toxicity – single exposure (Category 3), Respiratory system Pictogram Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
Precautionary statement(s):
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P264 Wash skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of soap and water.
P304+P340 IF INHALED: Remove to fresh air and keep at rest in a position comfortable for
breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
P312 Call a poison center or doctor if you feel unwell.
P321 Specific treatment (see supplemental first aid instructions on this label).
P332+P313 If skin irritation occurs: Get medical advice/attention.
P337+P313 If eye irritation persists: Get medical advice/attention.
P362 Take off contaminated clothing and wash before reuse.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS:
None
General Information: Immediately remove any clothing contaminated by the product. Move out of dangerous area. Consult a physician and show this safety data sheet.
Inhalation: Move person to fresh air. If not breathing, give artificial respiration. If breathing is
difficult, give oxygen. Obtain medical aid.
Skin contact: Immediately flush skin with running water for at least 15 minutes while removing
contaminated clothing and shoes. Wash clothing before reuse. Obtain medical aid immediately.
Eye contact: Immediately flush open eyes with running water for at least 15 minutes. Obtain medical aid immediately.
Ingestion: Do NOT induce vomiting without medical advice. Rinse mouth with water. Never
administer anything by mouth to an unconscious person. Obtain medical aid immediately.
Most important symptoms and effects, both acute and delayed: No further information
available. Please see sections 2 and 11.
Indication of any immediate medical attention and special treatment needed: No further
Suitable extinguishing media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Specific hazards arising from the chemical: Carbon oxides, Hydrogen fluoride, Nitrogen oxides,
Sulfur oxides.
Advice for firefighters: As in any fire, wear a NIOSH-approved or equivalent, pressure-demand,
self-contained breathing apparatus and full protective gear. During a fire, irritating and highly toxic
gases may be generated by thermal decomposition or combustion.
Personal precautions, protective equipment and emergency procedures: Wear protective
equipment and keep unprotected personnel away. Ensure adequate ventilation. Remove all sources of ignition. Prevent further leak or spill if safe to do so. For personal protective equipment, please refer to section 8.
Environmental precautions: Do not let product enter drains, other waterways, or soil.
Methods and materials for containment and cleaning up: Prevent further leak or spill if safe to
do so. Vacuum, sweep up, or absorb with inert material and place into a suitable disposal container.
Consult local regulations for disposal. See section 13 for further disposal information.
Precautions for safe handling: Avoid contact with skin, eyes, and personal clothing. Wash hands thoroughly after handling. Avoid breathing fumes. Use only with adequate ventilation. Wear suitable protective clothing, gloves, and eye/face protection. Keep away from sources of ignition. Minimize dust generation and accumulation. Keep container tightly closed. Open and handle container with care. Do not eat, drink, or smoke while handling.
Conditions for safe storage, including any incompatibilities: Store in a tightly-closed
container when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. keep away from sources of ignition
Precautions for safe handling: Avoid contact with skin, eyes, and personal clothing. Wash hands thoroughly after handling. Avoid breathing fumes. Use only with adequate ventilation. Wear suitable protective clothing, gloves, and eye/face protection. Keep away from sources of ignition. Minimize dust generation and accumulation. Keep container tightly closed. Open and handle container with care. Do not eat, drink, or smoke while handling.
Conditions for safe storage, including any incompatibilities: Store in a tightly-closed
container when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances. keep away from sources of ignition
Skin and body: Protective clothing must be selected based on the hazards present in the workplace, the physical environment, the duration of exposure, and other factors. No fabric can provide protection against all potential hazards; therefore it is important to select the appropriate
protective clothing for each specific hazard. At the minimum, wear a laboratory coat and
close-toed footwear.
Respiratory: Respirators are not a substitute for accepted engineering control measures such as
enclosure or confinement of the operation, general and local ventilation, and substitution
of less toxic materials. When respiratory personal protective equipment is appropriate
based on an assessment of respiratory hazards in the workplace, use a NIOSH- or
CEN-certified respirator.
Physical State: Off-white powder
Molecular Formula: C16H15F2N3O3S
Molecular Weight: 367.37
Odor: Not available.
pH: Not available.
Boiling Point Range: Not available.
Freezing/Melting Point: 110-118°C
Flash Point: Not available.
Evaporation Rate: Not available.
Flammability(solid,gas): Please see section 2.
Explosive limits: Not available.
Vapor Pressure: Not available.
Vapor Density: Not available.
Solubility: Not available.
Relative Density: Not available.
Refractive Index: Not available.
Volatility: Not available.
Auto-ignition Temperature: Not available.
Decomposition Temperature: Not available.
Partition Coefficient: Not available.
RTECS# Not available.
Acute toxicity: Not available.
Routes of exposure: Inhalation, eye contact, skin contact, ingestion.
Symptoms related to the physical, chemical and
toxicological characteristics: Skin contact may result in inflammation characterized by itching, scaling, reddening, blistering, pain or dryness. Eye contact may result in redness, pain or severe eye damage. Inhalation may cause irritation of the lungs and respiratory system. Overexposure may result in serious illness or death.
Carcinogenicity
IARC: Not classified.
NTP: Not listed.
OSHA: Not listed.
Acute toxic effects: Inflammation of the eye is characterized by redness, watering, and itching. Skin inflammation is characterized by itching, scaling, reddening, or, occasionally
No data available.
Not available.
Disposal of waste: Chemical waste generators must determine whether a discarded chemical is
classified as hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR 261.3. Additionally, waste generators must consult state and local hazardous waste regulations to ensure complete and accurate classification. Observe all federal, state and local regulations when disposing of the substance.
Disposal of packaging: Do not reuse containers. Dispose of as unused product.
Not data available.
TSCA (United States)
This product is NOT on the EPA Toxic Substance Control Act (TSCA) inventory. The product is
supplied solely for use in research and development by or under the supervision of a technically
qualified individual as defined in 40 CFR § 720 et seq. The health risks have not been fully determined. Any information that is or becomes available will be supplied on the SDS.
The information above is believed to be accurate and represents the best information currently available to us.
© All Copyright 2023 by SHREEJAYA LABORATORIES PVT.LTD.